|
|
|
Forum Newbie
Group: Forum Members
Last Login: 9/2/2010 10:43:09 AM
Posts: 1,
Visits: 2
|
|
| I'm trying to sync E Prime with psychophysiology equipment (Psylab equipment to be exact), and I was wondering if anyone knew of a specific device to accomplish this? I'm thinking it's some kind of cord... I'm only running skin conductance equipment, so I wouldn't need parallel ports for multiple signals - just the one connection. Any help is appreciated! Thanks.
|
|
|
|
|
Forum Newbie
Group: Forum Members
Last Login: 11/19/2010 9:18:41 PM
Posts: 1,
Visits: 7
|
|
If your PsyLab setup is similar to the company's updated setup, there should be an empty port on the "daisy chain" - the cable connecting the SAM units-. This port is for an event synchronization port. You may also have a special plug for that port. Here's a link to the hardware manual for some more info on it:
[url=http://www.psychlab.com/downloads/Hardware%20Manual%20-%202009.pdf][/url]
You're going to need a parallel port to send an 8bit signal to the event synchronization port whenever an event happens.
Hope this helps
|
|
|
|
