Parallel Port Adapters
The following are results of using E-Prime and the BBTK to send and receive various square waves. In the sending paradigm, the E-Prime computer would send square wave values to the Parallel Port, which was connected to the BBTK and received through its Stimulus Capture application. In the receiving paradigm, the E-Prime computer receive square wave values from the Parallel Port, which was connected to the BBTK and sent through its Event Generation application. Each square wave was sent at 50% duty cycle of 1/2 the time up and 1/2 the time down. For example, a 2ms square wave would issue 1ms of high time and 1ms of low time, a 10ms square wave would issue 5ms of high time and 5ms of low time. These are results from one paradigm under a set of hardware and circumstances. The results of these tests do not imply that hardware will behave identically under all circumstances and configurations. Each lab machine should be tested with appropriate equipment.
Parallel Port Receiver Results 5ms
|
Adapter |
Type |
Machine |
Operating System |
Expected (ms) |
Mean (ms) |
StdDev |
Min (ms) |
Max (ms) |
|---|---|---|---|---|---|---|---|---|
|
On Board |
Motherboard Chipset |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
5 |
4.980 |
0.105 |
4.219 |
5.028 |
|
SYBA SD-PCI-1P |
PCI |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
5 |
4.997 |
0.014 |
4.963 |
5.025 |
|
Koutech 1NP |
PCI |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
5 |
5.000 |
0.016 |
4.933 |
5.035 |
|
SIIG CyberParallel JJ-P00112 |
PCI |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
5 |
5.001 |
0.016 |
4.947 |
5.039 |
|
SYBA SD-PCI-4S1P |
PCI |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
5 |
4.997 |
0.016 |
4.964 |
5.047 |
|
Sunix 4008A |
PCI |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
5 |
5.000 |
0.025 |
4.909 |
5.175 |
|
On Board |
Motherboard Chipset |
HP ZD7000 Laptop (2.8 GHZ) |
Windows XP SP2 |
5 |
4.998 |
0.061 |
4.598 |
5.081 |
|
Quatech SPP-100 |
PCMCIA |
HP ZD7000 Laptop (2.8 GHZ) |
Windows XP SP2 |
5 |
5.004 |
0.051 |
4.857 |
5.132 |
|
TransDigital TransPC Card |
PCMCIA |
HP ZD7000 Laptop (2.8 GHZ) |
Windows XP SP2 |
5 |
5.042 |
0.391 |
4.921 |
8.876 |
Parallel Port Receiver Results 10ms
|
Adapter |
Type |
Machine |
Operating System |
Expected (ms) |
Mean (ms) |
StdDev |
Min (ms) |
Max (ms) |
|---|---|---|---|---|---|---|---|---|
|
On Board |
Motherboard Chipset |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
10 |
10.001 |
0.014 |
9.970 |
10.029 |
|
SYBA SD-PCI-1P |
PCI |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
10 |
10.000 |
0.018 |
9.905 |
10.030 |
|
Koutech 1NP |
PCI |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
10 |
10.003 |
0.015 |
9.969 |
10.036 |
|
SIIG CyberParallel JJ-P00112 |
PCI |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
10 |
10.003 |
0.016 |
9.970 |
10.043 |
|
SYBA SD-PCI-4S1P |
PCI |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
10 |
10.001 |
0.016 |
9.967 |
10.052 |
|
Sunix 4008A |
PCI |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
10 |
9.995 |
0.074 |
9.390 |
10.041 |
|
On Board |
Motherboard Chipset |
HP ZD7000 Laptop (2.8 GHZ) |
Windows XP SP2 |
10 |
9.999 |
0.034 |
9.914 |
10.077 |
|
Quatech SPP-100 |
PCMCIA |
HP ZD7000 Laptop (2.8 GHZ) |
Windows XP SP2 |
10 |
10.034 |
0.387 |
9.812 |
13.805 |
|
TransDigital TransPC Card |
PCMCIA |
HP ZD7000 Laptop (2.8 GHZ) |
Windows XP SP2 |
10 |
10.011 |
0.086 |
9.882 |
10.707 |
Parallel Port Receiver Results 100ms
|
Adapter |
Type |
Machine |
Operating System |
Expected (ms) |
Mean (ms) |
StdDev |
Min (ms) |
Max (ms) |
|---|---|---|---|---|---|---|---|---|
|
On Board |
Motherboard Chipset |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
100 |
99.994 |
0.080 |
99.216 |
100.034 |
|
SYBA SD-PCI-1P |
PCI |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
100 |
100.001 |
0.021 |
99.857 |
100.035 |
|
Koutech 1NP |
PCI |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
100 |
100.004 |
0.015 |
99.969 |
100.032 |
|
SIIG CyberParallel JJ-P00112 |
PCI |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
100 |
100.002 |
0.015 |
99.968 |
100.034 |
|
SYBA SD-PCI-4S1P |
PCI |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
100 |
100.010 |
0.106 |
99.967 |
101.047 |
|
Sunix 4008A |
PCI |
Dell 8200 Desktop (2.2 GHZ) |
Windows XP SP2 |
100 |
100.003 |
0.016 |
99.968 |
100.033 |
|
On Board |
Motherboard Chipset |
HP ZD7000 Laptop (2.8 GHZ) |
Windows XP SP2 |
100 |
99.999 |
0.074 |
99.393 |
100.091 |
|
Quatech SPP-100 |
PCMCIA |
HP ZD7000 Laptop (2.8 GHZ) |
Windows XP SP2 |
100 |
N/A |
N/A |
N/A |
N/A |
|
TransDigital TransPC Card |
PCMCIA |
HP ZD7000 Laptop (2.8 GHZ) |
Windows XP SP2 |
100 |
N/A |
N/A |
N/A |
N/A |
The paradigm used on the E-Prime side was the PortSenderReceiver. Event generation file used on the BBTK. A minimum of 100 square waves were sent or received per subject/session run. You can click here to download the parrallel port timing files used.